Structured cabling is building or campus telecommunications cabling infrastructure that consists of a number of standardized smaller elements; Entrance Facilities are where the building interfaces with the outside world. Equipment Rooms host equipment which serve the users inside the building. Telecommunications Rooms house telecommunication equipment which connect the backbone and the horizontal cabling subsystems. Backbone Cabling connect between the entrance facilities, equipment rooms and telecommunications rooms. Horizontal Cabling connect telecommunications rooms to individual outlets on the floor. Work-Area Components connect end-user equipment to outlets of the horizontal cabling system.
CablingWe love cables and install them everyday! We'll look at your office and determine the cabling that will work best for you. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Coaxial Cabling Called "coaxial" because it includes one physical channel that carries the signal surrounded (after a layer of insulation) by another concentric physical channel, both running along the same axis. The outer channel serves as a ground. Many of these cables or pairs of coaxial tubes can be placed in a single outer sheathing and, with repeaters, can carry information for a great distance.
|
 |
Drop Cable PVC jacketed Bus Drop Cable is intended for use as drop cables from overhead busways and allows easy relocation of plant equipment. They have individual grounds per conductor. Conductors, grounds and filler are cabled for flexibility then wrapped in a separator to aid strippability. Rated for use in wet or dry locations.. |
 |
Twisted Pair Unshielded Twisted Pair (UTP) cable contains 4 twisted pairs of wires, a total of 8 wires. The strands that constitute each wire will either be a single strand or multiple strands, usually referred to as solid or flex. Typically the solid is used to run through walls and ceilings and the flex is used to make drop cables and patch cables. |
 |
Fiber Optic Cables Fiber Optic Cables use light pulses to transmit information down fiber lines instead of using electronic pulses to transmit information in copper lines. Light pulses move easily down the fiber-optic line because of a principle known as total internal reflection. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Like Us!
Pintrest
Join Us!
Watch Us!
ByzBlog
|
|
|
